Benq SX912 Benutzeranleitung

Operation

29

Switching input signal

The projector can be connected to multiple devices at the same time. However, it can only 

display one full screen at a time. 

Be sure the Quick Auto Search function in the Source menu is On (which is the 

default of this projector) if you want the projector to automatically search for the signals.

You can also manually cycle through the available input signals.

1.

Press SOURCE on the projector or press input source directly from the remote 
control. A source selection bar displays. 

2.

Press ▲/▼ until your desired signal is selected and press MODE/ENTER.
Once detected, the selected source information will display on the screen for 
seconds. If there is multiple equipment connected to the projector, repeat steps 1-2 
to search for another signal.

•

The brightness level of the projected image will change accordingly when you switch between different 

input signals. Data (graphic) "PC" presentations using mostly static images are generally brighter than 

"Video" using mostly moving images (movies).

•

For best display picture results, you should select and use an input signal which outputs at this resolution. 

Any other resolutions will be scaled by the projector depending upon the 'aspect ratio' setting, which may 

cause some image distortion or loss of picture clarity. See 

 for 

details.

In the unlikely event that you connect the projector to a DVD player via the projector’s

HDMI input and the projected picture displays wrong colors, please change the color 

space.

To do this:

1.

Press MENU/EXIT and then press ◄/► until the SOURCE menu is highlighted.

2.

Press ▼ to highlight Color Space Conversion and press ◄/► to select the 
setting.

This function is only available when the HDMI input socket is in use.