Barco Projector 26-0313000-00 Benutzerhandbuch
Encore Presentation System • User’s Guide • Rev 04
351
7. Operations
Working with Tallies
tçêâáåÖ=ïáíÜ=q~ääáÉë
The "Tally" function can be enabled or disabled as required.
Use the following steps to enable or disable tallies:
1.
Ensure that your tallies are properly set up. In Chapter 6, refer to the "
" section on page 285 for instructions.
2.
In the System Keypad, press SYSTEM to display the System Menu.
3.
On the Tally Mode line:
~
Select On to enable all assigned tally relay closures.
~
Select Off to disable all assigned tally relay closures.
Please note:
•
Remember that tallies are mapped to inputs. When Tally Mode is On, if a
"mapped" tally goes to Program, one of the associated eight tally circuits turns on.
"mapped" tally goes to Program, one of the associated eight tally circuits turns on.
•
When the "mapped" input is removed from Program, the associated tally turns off.
•
Tally functionality can be tested. On the System Menu, press {DIAG} > {TALLY}
to initiate the test.
to initiate the test.
•
In Appendix A, refer to the “
details.