Barco Projector 26-0313000-00 Benutzerhandbuch

Using Backup and Restore

The Encore system enables you to backup and restore all (or a portion) of the complete 
system configuration setup using a customer supplied flash memory card.  The following 
topics are discussed:

This procedure enables you to back up all (or a portion) of the entire Encore system 
configuration.   Please note the following important points:

You can only store one system configuration on a Flash Memory Card.  

Customer supplied Flash Memory Cards must be equal to or greater than 512MB.

„

Use the following steps to back up your system:

Ensure that you have a (customer supplied) Flash Memory Card available.

Insert the Flash Memory Card into the Controller’s rear panel Memory Card slot.

Press MISC on the Home Menu, or press MISC in the System Keypad.

Press {BACKUP RESTORE} to display the Backup/Restore Menu.  

On the Device line, select the combination of devices you want to back up:

 — backs up the Controller only.

 — backs up the Video Processors and ScreenPRO-IIs only.

 — backs up the Controller, the Video Processors and any 

ScreenPRO-IIs.

On the Controller Options line, select which portion of the selected devices you 
want to back up.  Choose between All, System or Presets. 

Press {CHECK CARD} to display the Current Backup Menu.

Check the “Controller files backed up” section to confirm the types of 
files present on the Flash Memory Card, if any.  (e.g., System, Presets, 
ScreenPRO-II).  If files are present, determine if you want to overwrite, or 
insert a new (blank) card.

Press {BACK} to return to the Backup/Restore Menu.

Press {BACKUP} to backup your system to the Flash Memory Card using the 
selected device(s) and options.