Whirlpool WFG710H0AS Benutzung Und Pflege

Turns off the short tones that sound 1 minute after the end of cycle 
tones.
1. Press SETTINGS until “REMINDER TONE” is displayed.
2. Press START to display the current setting.
3. Press the “3” keypad to adjust the setting.
4. Press START to save the setting.
5. Press CANCEL to exit.

Activates or turns off the tones when a keypad is pressed.
1. Press SETTINGS until “KEY PRESS TONE” is displayed.
2. Press START to display the current setting.
3. Press the “3” keypad to adjust the setting.
4. Press START to save the setting.
5. Press CANCEL to exit.

Sets the pitch of the tone to either high or low.
1. Press SETTINGS until “TONE PITCH” is displayed.
2. Press START to display the current setting.
3. Press the “3” keypad to adjust the setting.
4. Press START to save the setting.
5. Press CANCEL to exit.

IMPORTANT: This feature is intended for use on the sales floor 
with 120 V power connection and permits the control features to be 
demonstrated without heating elements turning on. If this feature is 
activated, the oven will not work.

1. Press SETTINGS until “DEMO MODE” is displayed.
2. Press START to display the current setting.
3. Press the “3” keypad to adjust the setting.
4. Press START to save the setting.
5. Press CANCEL to exit.

The oven control is set to automatically shut off the oven 12 hours 
after the oven initiates a cook or clean function. This will not 
interfere with any timed or delay cook functions.
1. Press SETTINGS until “12-HR SHUT-OFF” is displayed.
2. Press START to display the current setting.
3. Press the “3” keypad to adjust the setting.
4. Press START to save the setting.
5. Press CANCEL to exit.

1. Press SETTINGS until “12/24 HR” is displayed.
2. Press START to display the current setting.
3. Press the “3” keypad to adjust the setting.
4. Press START to save the setting.
5. Press CANCEL to exit.

Language options are English, Spanish and French. 
1. Press SETTINGS until “LANGUAGE” is displayed.
2. Press START to display the current setting.
3. Press the “3” keypad to adjust the setting.
4. Press START to save the setting.
5. Press CANCEL to exit.

The Sabbath Mode sets the oven to remain on in a bake setting 
until turned off. 
When the Sabbath Mode is set, all cooking and cleaning cycles are 
disabled. Only the Bake cycle will operate in the Sabbath Mode. No 
tones will sound, and the displays will not show messages or 
temperature changes.
When the oven door is opened or closed, the oven light will not turn 
on or off and the heating elements will not turn on or off 
immediately.

1. Open oven door.
2. Press 7-8-9-6. 

“SABBATH ON” or “SABBATH OFF” and “PRESS START TO 
ENTER” will appear in the display.

3. Press START to change the displayed status.
4. Close oven door. Sabbath Mode can be used for baking.

NOTE: To disable the Sabbath Mode, repeat steps 1 - 3 to 
change the status from “SABBATH ON” to “SABBATH OFF.”

1. Press BAKE.
2. Press the number keypad to set a temperature other than 

350°F (177°C).

3. Press START.

For timed cooking in Sabbath Mode, press COOK TIME, then 
the number keypad to set the desired cook time.

4. Press SETTINGS, then press “7.” “SAb” will appear in the 

display.

1. Press the number keypad as instructed by the scrolling text to 

select the new temperature. 
NOTE: The temperature adjustment will not appear on the 
display. The scrolling text will be shown on the display as it was 
before the keypad was pressed.

2. Press START.

Press SETTINGS, then press “7” to return to regular baking or 
press CANCEL to turn off the range.

IMPORTANT: To avoid permanent damage to the oven bottom 
finish, do not line the oven bottom with any type of foil or liner.

For best cooking results, do not cover entire oven rack with foil 
because air must be able to move freely.