West Elm Staggered Chandelier Large Montageanweisungen
9. Align the Canopy(E) hole with the Pole(J) and take the Canopy (E) onto the Pole (J)
10.Take the Washer (O) and Ground Wire Ring (P) onto the Pole(J) at right
11.Screw the Hex Nut (Q) onto the Pole(J) tighten by Wrench (R) (Not included)
12.Carefully inspect the chandelier's fi xture wires. The NEUTRAL FIXTURE WIRE is marked “N”. The HOT FIX
TURE WIRE is marked “L”. The yellow-green or bare wire is the GROUND WIRE.
13.Attach the GROUND WIRE from the fi xture to the GROUND JUNCTION BOX WIRE from the outlet (usually
green or bare wire). Fasten each together with a plastic wire connector (A) and wrap the connection with
electrical tape. Be sure that no wire strands are exposed. If your outlet box DOES NOT have a GROUND
WIRE, be sure to insert the green ground screw (B) into the Mounting plate (F) facing DOWN, and wrap the
fi xture's bare ground wire around the ground screw. IT IS IMPERATIVE THAT THE OUTLET BOX IN YOUR
HOME BE PROPERLY GROUNDED.
14.Connect the NEUTRAL FIXTURE WIRE mared "N" to the NEUTRAL JUNCTION BOX WIRE ( white). Fasten
each together with a plastic wire connector (A) and wrap the connection with electrical tape. Be sure no
wire strands are exposed.
15.Connect the HOT FIXTURE WIRE marked "L" to the HOT JUNCTION BOX WIRE ( black). Fasten each together
with a plastic wire connector (A) and wrap the connection with electrical tape. Be sure no wire strands are
exposed. DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY WILL BE COMPROMISED.
16.Gently tuck the wire connections neatly into the ceiling junction box.
17.Attach the mounting plate (D) to the ceiling outlet box using the enclosed mounting screws (C). Tighten
screws with a screwdriver (Not Included).
18.Pull canopy (E) up over the mounting plate (D), align the hole in the mounting plate with the hole in the
canopy.
19.Insert the enclosed Canopy screws (F). Tighten screws with a screwdriver (Not included).
20.Insert 8x60 -watt Type A bulbs (not included) into the socket .DO NOT EXCEED SPECIFIED WATTAGE.
21.Restore power to junction box and test fi xture.
22.Assembly is complete.
10.Take the Washer (O) and Ground Wire Ring (P) onto the Pole(J) at right
11.Screw the Hex Nut (Q) onto the Pole(J) tighten by Wrench (R) (Not included)
12.Carefully inspect the chandelier's fi xture wires. The NEUTRAL FIXTURE WIRE is marked “N”. The HOT FIX
TURE WIRE is marked “L”. The yellow-green or bare wire is the GROUND WIRE.
13.Attach the GROUND WIRE from the fi xture to the GROUND JUNCTION BOX WIRE from the outlet (usually
green or bare wire). Fasten each together with a plastic wire connector (A) and wrap the connection with
electrical tape. Be sure that no wire strands are exposed. If your outlet box DOES NOT have a GROUND
WIRE, be sure to insert the green ground screw (B) into the Mounting plate (F) facing DOWN, and wrap the
fi xture's bare ground wire around the ground screw. IT IS IMPERATIVE THAT THE OUTLET BOX IN YOUR
HOME BE PROPERLY GROUNDED.
14.Connect the NEUTRAL FIXTURE WIRE mared "N" to the NEUTRAL JUNCTION BOX WIRE ( white). Fasten
each together with a plastic wire connector (A) and wrap the connection with electrical tape. Be sure no
wire strands are exposed.
15.Connect the HOT FIXTURE WIRE marked "L" to the HOT JUNCTION BOX WIRE ( black). Fasten each together
with a plastic wire connector (A) and wrap the connection with electrical tape. Be sure no wire strands are
exposed. DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY WILL BE COMPROMISED.
16.Gently tuck the wire connections neatly into the ceiling junction box.
17.Attach the mounting plate (D) to the ceiling outlet box using the enclosed mounting screws (C). Tighten
screws with a screwdriver (Not Included).
18.Pull canopy (E) up over the mounting plate (D), align the hole in the mounting plate with the hole in the
canopy.
19.Insert the enclosed Canopy screws (F). Tighten screws with a screwdriver (Not included).
20.Insert 8x60 -watt Type A bulbs (not included) into the socket .DO NOT EXCEED SPECIFIED WATTAGE.
21.Restore power to junction box and test fi xture.
22.Assembly is complete.
Care Instructions:
•Wipe clean using a soft, dry cloth or static duster.
•Always avoid the use of harsh chemicals and abrasives to clean fi xture as they may damage the fi nish.
•Wipe clean using a soft, dry cloth or static duster.
•Always avoid the use of harsh chemicals and abrasives to clean fi xture as they may damage the fi nish.