Whirlpool TEP325MW0 Benutzerhandbuch

Seite von 20
9
Use the following chart as a guide for cookware material 
characteristics.
ELECTRONIC OVEN 
CONTROL
Oven Indicator Lights
The indicator lights are located to the left of, and within the 
display. The indicator lights light up or flash when the oven is in 
one of the following modes: BAKE, BROIL, START?, ON, TIMER, 
COOK TIME/TIMED cooking (on some models), and START 
TIME/DELAY cooking (on some models).
Display
When power is first supplied to the appliance, “PF” will appear on 
the display. Press OFF/CANCEL to clear. If “PF” appears at any 
other time, a power failure has occurred. Press OFF/CANCEL 
and reset the clock if needed.
When the oven is in use, the display shows preheat time or oven 
temperature setting. When the oven is not in use, the display 
shows the time of day.
When using START TIME/COOK TIME the display will show either 
hours and minutes, or minutes and seconds. When setting a 
function, if START/ENTER is not pressed, and after 5 seconds, 
the “Start?” oven indicator light will flash. Press START/ENTER, 
or after 5 minutes, the set function will be canceled.
Start/Enter
The START/ENTER pad begins any oven function. On some 
models, if pad is not pressed within 5 seconds after pressing a 
function pad, the “START?” indicator light will flash as a reminder. 
On some models, “START?” will appear on the display.
If pad is not pressed within 5 minutes after pressing a function 
pad, the oven display will return to the time of day mode and the 
programmed function will be canceled.
Off/Cancel
The OFF pad stops any function except the Clock, Timer and 
Control Lock.
Clock
This is a 12-hour clock and does not show a.m. or p.m.
To Set:
Before setting, make sure the oven and Timer are off.
1.
Press CLOCK.
2.
Press the TEMP/TIME “up” or “down” arrow pad to set the 
time of day.
3.
Press START/ENTER or CLOCK.
Timer
The Timer can be set in hours or minutes up to 12 hours and 59 
minutes and counts down the set time. The Timer does not start 
or stop the oven.
To Set:
1.
Press TIMER CANCEL*. The timer oven indicator light will 
light up.
2.
Press the TEMP/TIME “up” or “down” arrow pad to set the 
length of time.
3.
Press START/ENTER. When the set time ends, four 1-second 
tones will sound.
4.
Press TIMER CANCEL* anytime to cancel the timer and/or 
stop reminder tones. To cancel the timer during the 
countdown, press TIMER CANCEL* twice.
The time can be reset during the countdown by repeating the 
above steps. To display the time of day when the timer is 
counting down, press CLOCK.
COOKWARE
CHARACTERISTICS
Aluminum
Heats quickly and evenly.
Suitable for all types of cooking.
Medium or heavy thickness is best for 
most cooking tasks.
Cast iron
Heats slowly and evenly.
Good for browning and frying.
Maintains heat for slow cooking.
Ceramic or 
Ceramic glass
Follow manufacturer’s instructions.
Heats slowly, but unevenly.
Ideal results on low to medium heat 
settings.
Copper
Heats very quickly and evenly.
Earthenware
Follow manufacturer’s instructions.
Use on low heat settings.
Porcelain enamel-
on-steel or cast 
iron
See stainless steel or cast iron.
Stainless steel
Heats quickly, but unevenly.
A core or base of aluminum or copper on 
stainless steel provides even heating.
1. Oven Display
2. Clock
3. Timer/Cancel
4. Start/Enter
(Control Lock)
5. Auto Clean
6. Off/Cancel
  7. Temperature/Time
  8. Cook Time
  9. Start Time
10. Custom Broil
11. Bake
1
2
3 4 5
6
11
10
9
8
7