Whirlpool SF3020EK Benutzerhandbuch

See “Sealed Surface Burners” section.

See “Surface Burners” section.

Do not use steel wool, abrasive cleansers or oven cleaner.

Do not soak knobs.

When replacing knobs, make sure knobs are in the OFF position.

On some models, do not remove seals under knobs.

■

Soap and water or dishwasher:

Pull knobs straight away from control panel to remove.

Do not use abrasive cleaners, steel-wool pads, gritty wash cloths 
or some paper towels. Damage may occur.

■

Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on 
panel.

Food spills should be cleaned when oven cools. At high 
temperatures, foods react with porcelain and staining, etching, 
pitting or faint white spots can result.

On some models, the oven door can be removed. See “Oven 
Door” first.

■

Steel wool pad

■

Oven cleaner:

Follow product label instructions. Do not let cleaner contact 
gasket, thermostat or exterior surfaces. Line the floor with 
newspaper.

■

Steel wool pad

Do not clean in the Self-Cleaning cycle.

■

Mildly abrasive cleanser:

Scrub with wet scouring pad.

■

Solution of 

¹₂ cup (125 mL) ammonia to 1 gallon (3.75 L) 

water:

Soak for 20 minutes, then scrub with scouring or steel wool 
pad.

■

Oven cleaner:

Follow product label instructions.

■

Dishwasher

(on some models)

■

Glass cleaner and paper towels or non-abrasive plastic 
scrubbing pad

The oven light is a standard 40-watt appliance bulb. This oven 
does not have an automatic door light switch. Press the manual 
oven light switch on the backguard to turn on and off.

Before replacing, make sure the oven and cooktop are cool and 
the control knobs are off.

1. Unplug range or disconnect power.

2. Turn bulb counterclockwise to remove from socket.

3. Replace bulb.

4. Plug in range or reconnect power.

For normal range use, it is not suggested to remove the oven 
door. However, if necessary, follow these instructions. The oven 
door is heavy.

1. Open the oven door. Insert hinge pins, included with your 

range, into both hinge hangers. Do not remove the pins while 
the door is removed from the range.

2. Grasp the door on the sides with your fingers on the front of 

the door and your thumbs on the inside surface.

3. Pull door straight up, then toward you. Do not remove hinge 

pins until the door is replaced on the range.

1. Grasp the door on the sides with your fingers on the front of 

the door and your thumbs on the inside surface.

2. Hold oven door so that the top edge of each door slot is 

horizontal. Insert door hinge into the hinge slots.