Westell Technologies 36R570 Benutzerhandbuch

030-300153A

46

 When WebShare is installed, the firewall feature is automatically active and set to the medium security level. Turning off
the firewall feature reverts the WireSpeed Pro to basic NAT functionality--individual IP addresses are hidden from outside.
Turning off the firewall requires changing two settings:  1) the Security Level on the Firewall Security panel for outbound
traffic, and 2) disabling Port Forwarding on the Firewall Port Forwarding panel for inbound traffic.

Use the following procedure to turn the firewall off.
1.  On the WebShare Management Menu, click Firewall. The gray Firewall Security screen appears.
2.  Click the option button for Low.
3.  Click Save at the bottom of the screen.
4.  Click the Port Forwarding link on the green tab. The green Port Forwarding screen appears.
5.  Click the Disable option button.
6.  Click Save at the bottom of the screen. Wait for the modem to restart.

Use the following procedure to turn the firewall back on.
1.  On the Firewall Security screen, set the Security Level to High, Medium, or Custom.
2.  Click Save at the bottom of the screen.
3.  Click the Port Forwarding link on the green tab. The green Port Forwarding screen appears.
4.  Click the Enable option button.
5.  Click Save at the bottom of the screen. Wait for the modem to restart.

 

 NOTE