Westell Technologies 36R570 Benutzerhandbuch

030-300153A

48

 This section describes possible WebShare error messages and how to correct them. The figure below shows an example of
an error message.

E1000 – WebShare Proxy Router Not Connected

Description:  The WireSpeed Pro Proxy Router (ADSL Modem) has not achieved synchronization.  The router
may take several minutes to achieve synchronization.

Remedy:  Check the DSL cables and connections.  If all connections are correct and the problem persists, contact
your service provider.

E1001 – Network Circuit Not Available

Description:  The ATM virtual circuit has not been established within the ADSL Router.

Remedy:  Contact your ISP.

E1002 – PPP Remote Access Server (RAS) Not Available

Description:  There is no response from the RAS while attempting to activate a PPP 

account.

Remedy:  Contact your ISP.

E1003 – Invalid Login

Description:  An invalid User ID and/or password was used.

Remedy:  Verify that the User ID is a valid account, then retry the password.  Contact your ISP if this problem
persists.

E1005 – IP Remote Router Not Available

Description:  The remote router is not responding.

Remedy:  Contact your ISP.

E1008 – Configuration Information Corrupt

Description:  The PPP account or Advanced Configuration information is corrupt.

Remedy:  Delete the PPP accounts and re-enter the account information and the Advanced Configuration
information.