Utica Boilers UB95M-200 Installationsanweisungen

2 - IMPORTANT SAFETY INFORMATION

NOTICE

Used to address practices not related to personal

injury.

CAUTION

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

WARNING

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

DANGER

Indicates a hazardous situation which, if not avoided,

WILL result in death or serious injury

This is the safety alert symbol. Symbol alerts you to

potential personal injury hazards. Obey all safety messages

following this symbol to avoid possible injury or death.

Become familiar with symbols identifying
potential hazards.

General
Boiler installation shall be completed by qualified agency.

WARNING

Fire, explosion, asphyxiation and electrical shock

hazard. Improper installation could result in death or

serious injury. Read this manual and understand all

requirements before beginning installation.

Keep this manual near boiler

Retain for future reference

Installation shall conform to requirements of

authority having jurisdiction or in absence of such

requirements:

• United States
• National Fuel Gas Code, ANSI Z223.1/NFPA 54.
• National Electrical Code, NFPA 70.
• Canada

• Natural Gas and Propane Installation Code, CAN/CSA

B149.1. and .2

• Canadian Electrical Code, Part I, Safety Standard for

Electrical Installations, CSA C22.1

Where required by authority having jurisdiction,

installation shall conform to Standard for Controls

and Safety Devices for Automatically Fired Boilers,

ANSI/ASME CSD-1.
Additional manual reset low water cutoff and/or manual

reset high limit may be required.

WARNING

Revision, modification, substitution or elimination of

factory equipped, supplied or specified components

could result in death or serious injury.

Use of this manual shall be by a qualified heating installer or

service technician only.

Before programming control read and understand all instructions

including :

• Installation, Operation and Maintenance Manual,
• Parameter Guide
• Control Manual and Troubleshooting Guide

Perform all steps in order specified.