RGB Spectrum DGY 201 Benutzerhandbuch

. . . . .

PLAY 

[-P] [playlist]

This command switches the unit to Playback mode 

and plays a previously made recording. 

The PLAY command plays back the items in the 

optional playlist.The playlist may contain up to 5 

clipnames. Clips in the playlist will be played in the 

order they appear in the playlist.

If a playlist is not entered, the most recently 

recorded clip in the current directory will be played.

It the optional -P argument is supplied, the DGy will 

be queued for playing but will immediately enter the 

 mode. To start playback from Pause 

a PLAY command must be issued. This provides 

the ability to set up a play back and to “instantly” 

start playback and is particularly useful in 

controlling multiple DGy recorders.

Example
Play the clips named clip1, clip7 and latest_clip 

using the PLAY PAUSE mode.

SYNChronizedPLAY 

<clipname> <starttime> 

[clipstarttime| startmark 

- MARK]

The 

 command is used to 

schedule playback of a clip at a specified time. The 

start point within the clip can be defined using the 

optional parameters 

or 

.

Example:
Start playback from the beginning of a clip named 

Rec227 at 8:15 pm, June 11th 2005.
syncrec Rec227 20050611500

The 

 command is typically 

used to synchronize multiple DGy recorders so that 

they will perform as a multi-channel playback 

system. Before using the DGy in this mode it is 

recommended that the real time clocks of each 

DGy are synchronized using either an IRIG or NTS 

time reference (synchronizing is then automatic). 

The 

 command should then 

be issued to each machine using the same time 

argument.

SYNChronizedSTATus

(none)

Cancels any queued synchronized command. See 

SYNChronizedPLAY and SYNChronizedRECord.