RGB Spectrum DGY 201 Benutzerhandbuch

. . . . .

~

Click Apply to upload the new time setting into DGy 
201’s active clock register.

Note that the DGy 201 will have to be restarted in order 
for the new time to be set. A warning message (see 
Figure 3-21) is issued asking you if you want to reboot 
immediately. 

The DGy 201 internal real time clock can be synchronized to an external 
time reference so that it is always set accurately. Accurate time 
references are provided by Network Time Servers (NTS) over the 
internet using the Network Time Protocol (NTP). 

Alternatively an optional IRIG-B time reference can be used. 

The Clock synchronization section provides the ability to set operation 
with either type of external time reference.

•

In the Clock Synchronization section:

~

Radio buttons are provided to set the DGy 201’s 
timecode synchronization functions, including NTS and 
IRIG (IRIG-B is an optional DGy 201  feature) 
assignments.

~

To use the Network Time Server (NTS) capability note 
that you will have to provide the IP address of at least 
one Network Time Server in the box provided before 
you can select the Network Time Server radio button in 
the clock synchronization section. You will also have to 
be sure that the DGy 201 can access the time server 
over your network connection. In Chapter 6, refer to the 
“

” command description for 

details.

~

To put an entry into the NTS list box, click on the Edit 
button associated with the NTS list.

~

Enter the new server IP address and press the ENTER 
button. 

~

If you want to change an existing entry, then first select 
the entry that you wish to edit using the drop down NTS 
list box, and then click on the Edit button. Enter the 
server IP address into the NTS list box and press the 
ENTER button.

~

Select the Network Time Server radio button to 
activate

OR