Panduit DPOE PN380C Benutzerhandbuch

Seite von 17
DP
O
E™ Power System User Manual 
 
Part Number: PN380C 
 
 
  
ii
 
 
SAFETY WARNING 
The DP
O
E™
 
Power Patch Panel Power System is for use in restricted access locations only. It is suitable 
for mounting on concrete or other non-combustible surfaces. 
  
Always observe standard safety precautions during installation, operation and maintenance of this 
product. Read the installation instructions before performing any work. Only a competent technician who 
is aware of the hazards involved should carry out adjustment, maintenance or repairs. Do not work on the 
system or connect or disconnect cables during periods of lightning activity. Ultimate disposal of this 
product should be handled according to all national laws and regulations. 
 
WARNING: 
HAZARDOUS VOLTAGE AND ENERGY LEVELS ARE PRESENT THAT CAN 
PRODUCE SERIOUS SHOCKS AND BURNS
. Only authorized, qualified, and 
trained personnel should attempt to work on this equipment.   
 
CAUTION: 
The plug end of the cords used to connect to the Alternating Current (AC) source 
are considered to be the primary disconnect means, and reasonable access must 
be given to the plug and receptacle area. The receptacle must be fed with a 
breaker or fuse according to the instructions in this guide. 
 
CAUTION: 
ALL RECTIFIERS EMPLOY INTERNAL DOUBLE POLE/NEUTRAL FUSING. 
 
FCC Compliance Statement 
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: 
 
1.  This device may not cause harmful interference, and 
2.  This device must accept any interference received, including interference that may cause undesired 
operation. 
 
WARNING: 
Changes or modifications to this unit not expressly approved by the party 
responsible for the compliance could void the user's authority to operate this 
equipment. 
 
WARRANTY 
Unless otherwise specified, all products presented in this user's guide are warranted against defects in 
material and workmanship for a period of one year from the date of invoice by PANDUIT® Corp. to the 
initial purchaser. During the warranty period PANDUIT Corp. will, at its discretion, either repair or replace 
products that prove to be defective. For warranty service or repair, the product claimed to be defective 
must be returned to a service facility designated by PANDUIT Corp. Buyer shall prepay all the shipping 
charges to PANDUIT Corp. and if, in the opinion of PANDUIT Corp., the product is defective, PANDUIT 
Corp. shall pay shipping charges to return the product to Buyer. However, Buyer shall pay all shipping 
charges, duties and taxes for products returned to PANDUIT Corp. from another country. PANDUIT Corp. 
warrants that its firmware designed by PANDUIT Corp. for use with an instrument will execute its 
functions when properly installed on that instrument. PANDUIT Corp. does not warrant that the operation 
of the instrument or the firmware will be uninterrupted or error-free. 
 
The foregoing warranty shall not apply to defects resulting from improper or inadequate maintenance by 
Buyer (buyer-supplied firmware or interfacing unauthorized modification or misuse, operation outside of 
the environmental specifications for the product, or improper site preparation or maintenance).  No other 
warranty is expressed or implied. PANDUIT Corp. specifically disclaims the implied warranties of 
merchantability and fitness for a particular purpose.