Telus Modem IR1200 Benutzerhandbuch
TELUS Mobility™
38
Range AT+wv301=?
Parameter
Values:
The authentication Key parameter is a text string of
up to 32 characters. Unlike most text-string
parameters, the Authentication key is a text
representation of a hexadecimal number. Therefore,
only the characters 0-9 and A-F are acceptable. (The
lower case character, a-f is also acceptable).
up to 32 characters. Unlike most text-string
parameters, the Authentication key is a text
representation of a hexadecimal number. Therefore,
only the characters 0-9 and A-F are acceptable. (The
lower case character, a-f is also acceptable).
NOTE: Although the parameter represents a
numeric value, the parameter is actually a text
string, so the parameter must be enclosed in
quotation marks.
numeric value, the parameter is actually a text
string, so the parameter must be enclosed in
quotation marks.
Mobile IP Session Timer [AT+wv302]
The command determines the maximum amount of time that a remote node can be registered with its Home Agent before
having to renew its registration. This parameter sets a user preference for a value that is negotiated within the network.
During the negotiation process, the user preference may be overruled by the network without notification.
having to renew its registration. This parameter sets a user preference for a value that is negotiated within the network.
During the negotiation process, the user preference may be overruled by the network without notification.
Command
+WV302
Action AT+wv302=<timer>
Query AT+wv302?
Range AT+wv302=?
Parameter
Values:
1800-65534 = Second before expiration
65535 = Timer never expires
7200 = Default value
DTE IP Address Prefix Length [AT+wv311]
The prefix-length is the number of contiguous bits in an IP address that makes up the network prefix (or network number
plus subnet number) of the IP address.
plus subnet number) of the IP address.
NOTE: This command sets the prefix length of the Mobile Node’s IP address, as specified by +WPNEI.
Command
+WV311
Action AT+wv311=
Query AT+wv311?
Range AT+wv311=?
Parameter
Values:
2-24 = Prefix length
2 = Default value
DTE Stack [AT+ws45]
This command sets the protocol for communication between the DEC and the DTE. Circuit-switched data connections allow
only the transparent character stream for packet data connections; use SLIP or CSLIP or PPP.
only the transparent character stream for packet data connections; use SLIP or CSLIP or PPP.
Command
+WS45
Action AT+ws45=
Query AT+ws45?
Range AT+ws45=?