Telus Modem IR1200 Benutzerhandbuch
TELUS Mobility™
40
Range ATs0=?
Parameter
Values:
0 = Do not automatically answer incoming calls
1-255 = Answer after specified number of rings
Circuit Data Establishment Timeout [ATs7]
This command allows the DTE to specify the maximum amount of time between a request for a circuit data connection and
the establishment of this connection.
the establishment of this connection.
Command
S7
Action ATs7=
Query ATs7?
Range ATs7=?
Parameter
Values:
1-255 = Seconds
30 = Default value
Comma Dial Modifier Timer [ATs8]
This command allows the DTE to set the duration of the pause associated with a comma (,) dial modifier.
Command
S8
Action ATs8=
Query ATs8?
Range ATs8=?
Parameter
Values:
0-255 = Seconds
2 = Default value
Circuit Data Idle Timer [ATs30]
This command specifies an idle line timeout for online data mode. If no data is sent by the DTE on the transmit data line
for the specified period of time, the DCE disconnects the call, returns the OK result code, and returns to command mode.
for the specified period of time, the DCE disconnects the call, returns the OK result code, and returns to command mode.
Command
S30
Action ATs30=
Query ATs30?
Range ATs30=?
Parameter
Values:
0-255 = Seconds
0 = Default value