Telus Cell Phone i877 Benutzerhandbuch
17
essentials
battery charging
New batteries are not fully charged.
charge using the charger
1
Pull out the
connector cover, and
insert the charger
into mini USB
connector on your
phone as shown.
connector cover, and
insert the charger
into mini USB
connector on your
phone as shown.
2
Plug the other end
of the charger into
the appropriate electrical outlet.
of the charger into
the appropriate electrical outlet.
When you charge the battery, the battery level
indicator at the upper right of the screen
shows charging progress. At least one
segment of the indicator must be visible to
ensure full phone functionality while charging.
indicator at the upper right of the screen
shows charging progress. At least one
segment of the indicator must be visible to
ensure full phone functionality while charging.
charge from your computer
You can partially charge your phone’s
battery by connecting a Motorola-approved
USB cable from your phone’s mini-USB port
to a high power USB connector on a
computer (not a low-power one, such as the
USB connector on your keyboard or bus-
powered USB hub). Typically, USB high-power
connectors are located directly on your
computer.
battery by connecting a Motorola-approved
USB cable from your phone’s mini-USB port
to a high power USB connector on a
computer (not a low-power one, such as the
USB connector on your keyboard or bus-
powered USB hub). Typically, USB high-power
connectors are located directly on your
computer.
Note: The phone will be charged at a slower
rate than it is charged with the rapid charger.
rate than it is charged with the rapid charger.
Your computer must be turned on, and you
must have correct software drivers installed
on your computer. If the phone is off when
must have correct software drivers installed
on your computer. If the phone is off when
4
Replace the battery door and press it
gently until you hear a click.
gently until you hear a click.