QMS 1800486-001C Benutzerhandbuch
6#
$1.%
7 %
$
/ /
3
Open the printer’s front cover.
Squeeze the latch near the upper-right
corner of the cover.
corner of the cover.
Caution:
This is necessary, as it pulls
the toner cartridges forward slightly to
make room for the OPC belt cartridge.
You could damage the OPC belt if you
don’t do this.
make room for the OPC belt cartridge.
You could damage the OPC belt if you
don’t do this.
»
Note:
The illustrations for steps 3
through 11 show the printer without the
duplexer. However, the instructions are
the same for both models.
duplexer. However, the instructions are
the same for both models.
4
Pull the latch to release the top
cover, and then open the top cover.
cover, and then open the top cover.
Caution:
If you have a duplex model,
make sure you have opened the
duplexer’s rear cover first. Forced
opening of the top cover first may
damage the unit.
duplexer’s rear cover first. Forced
opening of the top cover first may
damage the unit.
5
Rotate up the two lock levers (one on
each side of the OPC belt cartridge)
to release the cartridge.
each side of the OPC belt cartridge)
to release the cartridge.