LXE Home Security System VX-7 Benutzerhandbuch

 

 

LXE offers an adapter cable (part no. 9000A077CBLPWRADPTR) to adapt certain VX1, VX2 or 

VX4 DC power supplies to the VX7.  Please read and follow all cautions below to determine if 

your present power supply can be used with the VX7.   

 

This document assumes the VX1/2/4 DC power cable, if applicable, is already properly 

connected to your vehicle.  If this is not the case, please refer to the “VX1 User’s Guide”, “VX2 

User’s Guide” or “VX4 User’s Guide” for direct vehicle connection details. 

 

For use only with VX1/2/4 DC power cables with yellow colored cable containing 18AWG wires. 
Do not use this cable with VX1/2/4 DC power cables with gray colored cable containing 

22AWG wires.  These power cables must be replaced with a VX5/6/7 power cable. 

 

When a DC power cable that is eight feet or longer is in a 12V application, there may be an 

excessive voltage drop over the longer cable.  If this occurs, a new power cable is required. 

 

Do not use this adapter with AC power supplies originally designed for the 1380, 1390, VX1, 

VX2 or VX4.  These power supplies do not have sufficient power for the VX7. 

1.  The VX7 must be turned off and the power cable must be UNPLUGGED from the VX7. 
2.  Attach the smaller end of the Power Adapter Cable to the VX1/2/4 power cable by aligning 

the water-tight connector pins to the power cable connector.  Push down on the water-tight 
connector and twist it to fasten securely. 

3.  Connect the larger end of the Power Cable directly to the computer or to a UPS battery pack, 

as desired.  Please refer to the appropriate section earlier in this manual for UPS battery pack 
connection details.