LXE Home Security System VX-7 Benutzerhandbuch
Fuse Replacement for the VX7
The VX7 uses a 100V, 10A time delay (slow blow), high current interrupting rating fuse that is
externally accessible and user replaceable. Should it need replacement, replace with same
size, rating and type of fuse – Littlefuse 0234010 or Optifuse MSC-10A (5x20mm).
1. Turn the VX7 off and disconnect the power cable from the VX7.
Caution:
Fuse has voltage on it even when power is off. Always disconnect
input power before changing fuse.
input power before changing fuse.
2. While holding the VX7 over a level surface, push the fuse cover in and twist it one quarter
turn counterclockwise. A flat head screwdriver may be used to twist the fuse cover.
3. Remove the fuse.
4. Discard the fuse and place a new fuse in the holder.
5. Push the fuse in and twist it clockwise one quarter turn.
6. Reconnect the power cable to the VX7.
4. Discard the fuse and place a new fuse in the holder.
5. Push the fuse in and twist it clockwise one quarter turn.
6. Reconnect the power cable to the VX7.