Star Micronics TUP452-24 Benutzerhandbuch

 

– 20 –

 

In order to eject the paper after it is printed and cut, a presenter can be installed on the front of the cut-

ter.

Item

Specification

Possible sheet length

Approx. 80 mm (min.)

Setting

The presenter is installed and bit 8 of MSW5 is set to “1” at the time of
shipping. (Bit 0 of MSW5 is also set to “1” for the open frame.)

Operation sequence 
(viewed from the 
operator’s side)

a. The paper is not ejected during printing.
b. The cutter cuts the end of the paper after printing is completed.
c. The presenter’s roller rotates for 5 seconds, which causes the sheet to

be ejected from the exit. The sheet stops when the end leaves the
roller.

d. The next printing step starts when the sheet is removed by the operator.
e. If the sheet is not removed within 5 seconds, the roll begins to rotate.

If the status end request (EOT) is sent from the host computer while
the sheet is remains at the exit, the host computer will return to status
E5.