Technicolor - Thomson ITC250S Benutzerhandbuch

EN

The 

menu can be used to set the time on the TV set and program the automatic

sleep timer or wake-up timer functions.

Display the 

menu by pressing the 

button. Select the 

option

and press 

to confirm.

Select the 

option.

Select a channel with Teletext which can provide the time to be used as a reference
using the 

buttons, or enter a channel number using the numeric buttons on the

remote control.The time is displayed after a few seconds if it is available on the
selected channel.
If the time is not provided by Teletext the 

function is not available

and a message prompts you to change reference channel or enter the time manually.
You do this by selecting the 

option and entering the time using the

numeric buttons or the 

buttons.

Once the time has been set you can use the 

function.

Select the 

option.

Set an automatic shut-off time (from 0 to 4 hours in 5-minute intervals) by using the

buttons. Set the time to 00:00 to disable this function.

When the sleep timer is on, a message appears one minute before the television set goes
into standby mode. Press any button on the remote control to cancel standby mode.

This function can be used to set the time for the set to come on, for instance, for the
television to wake you up.

Select the 

option and press 

to check the box, which enables

this function and provides access to the relevant options.

Under the 

option enter the wake-up time using the numeric or 

buttons.

Under the 

option, use the 

buttons to set the period of time

(from 5 minutes to 4 hours in intervals of 5 minutes).

Under the 

option enter the number of the channel you want

to wake you using the 

or numeric buttons.You can also select an AV programme

using the 

button. In this case, make sure you programme the equipment connected

to the AV socket to come on as well.

For a daily wake-up check the box for the 

option by pressing 

.

Press 

to close the menu.

Put the TV set into standby mode using the 

button on the remote control.

The TV set will automatically switch on at the programmed time and for the programmed
duration if you do not interrupt it by using the remote control.

‹

‹ Sleep timer









itc250s-en  27/08/04  18:01  Page 15