Technicolor - Thomson ITC250S Benutzerhandbuch

Channel set-up

Manual channel set-up

Follow the procedure given on this page if you find that some channels have not been
stored during the initial set-up.This can happen if you are setting up cable network
channels. Setting up channels manually requires every setting for a particular channel to be
entered, one at a time.

Display the

OVERVIEW

menu by pressing the

MENU

button. Select the

Installation

option and press

to confirm. Select the

Installation

option from the

Install

and press

to confirm.

Select your country using the

buttons. Press

to confirm.The

Connections

screen appears. Press

to continue.The

Installation

menu appears. Select the

Manual installation

option and press

Define all the settings in turn for each channel to be stored. Follow the instructions
appearing at the bottom of the screen.

Select the

Standard

option. Use the

button to select the standard for your

country.

Note: The following standards are available to choose from:

for the UK and Ireland,

France

for

France and Luxembourg,

DKK’

for Eastern Europe, the Middle East and Asia,

EURO BG

for

Western Europe, Australia and New Zealand.

Select the

Reception

option. Select the reception method for the channels (aerial or

cable network) using the

button.

Select the

Channel search

option. Enter the number of the reception channel or

use the

buttons to find the channels.When a channel has been found the picture

is displayed.

If the picture is not clear you can adjust the setting.You do this by selecting the

Fine

tuning

option and adjusting it with the

buttons.

If the channel is recognised, its name is detected automatically, otherwise change the
name suggested or enter a name.To do so, go to the name with only its initial letter in
yellow. Choose the character to be changed using the

buttons. Scroll through the

alphabet using the 1 and 2 buttons. Go to the next character using the

buttons.

If the channel is encoded and you want to connect a decoder to the AV1 socket, select
the

Decoder

option and select

AV1

using the

button.

Then select the

Store on programme

option and enter the number to be

assigned to this channel using the numeric buttons (for instance, for BBC1 type 01).
Press

Important: Whenever you change a value in the

Manual install

menu, the

Store on

programme

option starts flashing. To confirm your change you need to select the

Store on

programme

option and press

. If you do not confirm the change it will be cancelled when

you change channels or put the TV set in standby.

Repeat this procedure to find other channels.

Notes:
- For cable networks, to search for missing channels, select

Other

instead of a country, then

select

Auto update

in the

Installation

menu.

- If you wish to go through the whole initial set-up process, put the TV in standby mode, then hold

down the

and

buttons on the television until the menu displays. Proceed as for the

initial set-up.

- Subsequent set-ups:

- The

Auto update

function allows you to set up channels just launched or any

channels that are missing or wrongly set up.

- The

Auto installation

function is used for setting up channels after the initial set-up

(e.g. after moving house).
This process deletes all channels previously stored. To set up a new channel, it is better to
use

Auto update

Manual installation

Return

Standard

I...

Reception

Aerial...

Channel search

CH 01

Fine tuning

Store on programme

Name

BBC1

Decoder

None...

Manual install

Use the

¦/

keys, or enter the channel number.

itc250s-en 27/08/04 18:01 Page 9