FieldServer FS-8700-72 Benutzerhandbuch
FS-8700-72 Secutron Manual
Page 3 of 15
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: 888-509-1970 email: support@fieldserver.com
1.
Secutron Modul-R driver Description
The Secutron Modul-R driver allows the FieldServer to transfer data to and from a Client and a Server
panel on a single point to point network over RS-232 using Secutron Modul-R protocol.
The protocol is strictly command/response with the Client polling a Server device. A Server device can
report the generation and clearing of alarms to the polling Client. One panel can be connected per
FieldServer port. The driver supports networked panels connected to a single port. The server driver
only supports 10 panels due to memory limitations. A Server panel can consist of up to 100 circuits.
Whan an alarm is generated, a bit is set and when the alarm is cleared, the bit is cleared. The panel
number is identified by the Node_ID in the configuration file.
panel on a single point to point network over RS-232 using Secutron Modul-R protocol.
The protocol is strictly command/response with the Client polling a Server device. A Server device can
report the generation and clearing of alarms to the polling Client. One panel can be connected per
FieldServer port. The driver supports networked panels connected to a single port. The server driver
only supports 10 panels due to memory limitations. A Server panel can consist of up to 100 circuits.
Whan an alarm is generated, a bit is set and when the alarm is cleared, the bit is cleared. The panel
number is identified by the Node_ID in the configuration file.
2.
Driver Scope of Supply
2.1.
Supplied by FieldServer Technologies for this driver
FieldServer Technologies PART #
Description
FS-8917-16
Pigtail cable for RJ45 Port
FS-8700-72
Driver Manual.
.