FieldServer FS-8700-72 Benutzerhandbuch
FS-8700-72 Secutron Manual
Page 7 of 15
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: 888-509-1970 email: support@fieldserver.com
4.4.
Client Side Map Descriptors
4.4.1.
FieldServer Specific Map Descriptor Parameters
Column Title
Function
Legal Values
Map_Descriptor_Name Name of this Map Descriptor
Up to 32 alphanumeric characters
Data_Array_Name
Name of Data Array where data
is to be stored in the FieldServer
is to be stored in the FieldServer
One of the Data Array names
from “Data Array” section above
from “Data Array” section above
Data_Array_Offset
Starting location in Data Array
0 to (Data_Array_Length-1) as
specified in “Data_Array” section
specified in “Data_Array” section
Function
Function
of
Client
Map
Descriptor
Rdbc, Passive_Client
Node_Name
Name of Node to fetch data from
One of the node names specified
in “Client Node Descriptor” above
in “Client Node Descriptor” above
Length
The number of devices on the
circuit the Map Descriptor must
detect
circuit the Map Descriptor must
detect
0-999
Block_Type*
Used to enable packed bit when
using a Packed_Bit Data Array
on the Map Descriptor
using a Packed_Bit Data Array
on the Map Descriptor
Flag, -
4.4.2.
Driver Specific Map Descriptor Parameters
Column Title
Function
Legal Values
Secutron_Type
Identifies the type of data the Map Descriptor
points to
points to
Poller, Device,
Function
Function
Secutron_Circuit Identifies the circuit or panel zone
0-99
4.4.3.
Timing Parameters
Column Title
Function
Legal Values
Scan_Interval
Rate at which data is polled
>= 0s