BENDIX BW2398 Benutzerhandbuch

Seite von 32
2
AIR INTAKE (LOADED)
During  the  piston  down  stroke,  a  vacuum  is  created  in 
the cylinder bore above the piston.  The vacuum causes 
the inlet reed valve to flex open.   Atmospheric air flows 
through  the  open  inlet  valve  and  fills  the  cylinder  bore 
above the piston.
AIR COMPRESSION (LOADED)
When the piston reaches approximately bottom dead center 
(BDC), the inlet reed valve closes.  Air above the piston is 
trapped by the closed inlet reed valve and is compressed 
as  the  piston  begins  to  move  toward  top  dead  center 
(TDC).  When air in the cylinder bore reaches a pressure 
greater  than  that  of  the  system  pressure  the  discharge 
reed valves open and air flows into the discharge line and 
air brake system.
Air, during the compression stroke, flows into the hollow 
center of the unloader piston through an opening in the end 
of the piston.  Compressed air acts on the interior surfaces 
of the unloader piston and, along with the unloader piston 
spring, holds the unloader piston against its seat on the 
valve plate.  See Figure 6.
NON-COMPRESSION OF AIR (UNLOADED)  
When  air  pressure  in  the  supply  reservoir  reaches  the 
cutout  setting  of  the  governor,  the  governor  delivers 
system air to the compressor unloader port.  Air entering 
the unloader port acts on the unloader piston causing it 
to move away from its seat on the valve plate assembly.  
When the unloader piston is unseated a passage is opened 
between the cylinder bore, the air inlet cavity in the cylinder 
head,  and  the  other  cylinder.   Air  compression  ceases.  
See Figure 7.
As the piston moves from bottom dead center (BDC) to 
top dead center (TDC) air in the cylinder bore flows past 
the unseated unloader piston, into the cylinder head inlet 
FIGURE 3 - 
TYPICAL COMPRESSOR DRIVE FLANGES
cavity and into the other cylinder.  A small amount of air 
moves out the inlet port.  On the piston down stroke (TDC 
to BDC) air flows in the reverse direction, from the other 
cylinder through the unloader piston to the inlet cavity, past 
the unseated unloader piston and into the cylinder bore.
Detroit 
Diesel
Caterpillar
FIGURE 4 - 
BA-922
®
 COMPRESSOR UNLOADER SYSTEM
Compressor
Supply Reservoir
Reservoir 
Port
Governor 
Unloader Port
Detroit 
Diesel
John 
Deere
Air Dryer
FIGURE 5 - 
OPERATION - LOADED (INTAKE)
Piston Moving Down
Air Inlet
Port
Inlet
Valve
Open
Air
Discharge
Port
Discharge
Valve
Closed
Unloader 
Piston 
Down & 
Seated
Valve
Plate
Unloader 
Port
Cooling
Plate