Magma PCIe Expansion System EB2 Benutzerhandbuch

34                

8.  After 5-6 seconds the LED will stop flashing and turn off 

completely.   

 

 

 

                        

 
Remove the card and replace it with a new one, then press the 
button again. 

 

Remove and 
replace the 
respective 
PCIe card 

 
 

Ideally the PCIe card that was removed from the system will be 
replaced with an identical, working card. Replacing that card with 
one that has a different function or purpose may cause the system 
to crash due to a mismatch in the resources pre-allocated by the 
operating system.   

 

 
9.  The LED should start flashing again.   

 
If power should not be applied to this slot, immediately 
press the button again and the LED will stop flashing and 
remain off, otherwise go to step 11. 
 

10.  After 5-6 seconds the LED will stop flashing and remain on.  

 
After a brief period the new device will be recognized by 
the system, and it should be added to the list in the 
“Safely Remove Hardware” dialog