LogTag Recorders LogTag Analyzer Temperature Recorder Benutzerhandbuch

Serial (RS232) communication ports can be typically found at the rear of the computer 
and there are usually at most two ports installed on a single computer. Most serial 
Interface Cradle connectors will have screws included on the plug and as such we 
recommend that these are tightened when the connector is plugged in so that it does not 
accidentally pull out during usage.  

The connectors for USB devices typically look like the following picture.  

 

Connectors for USB devices and the sockets on the computer where USB devices are 
plugged in will often display a USB logo nearby to help them be identified. Example 
pictures of the USB logos that may appear are: 

 

The sockets for the USB communication ports are typically located at the rear of the 
computer. In some computers there may also be two or more USB communication ports 
located on a front panel of the computer and/or on the top of the computer case. Please 
ensure that the software has been installed prior to connecting the USB Interface Cradle 
to the computer as the software installation also installs the drivers required to 
successfully connect and use the USB Interface Cradle. If you experience problems 
getting the software to find and identify a connected USB Interface Cradle then there may 
have been a problem during the installation of the software with the installation of the 
drivers that the USB Interface Cradle requires. The subsequent section 

 will guide through the steps necessary to resolve any problems with 

getting USB Interface Cradles working on the computer. 

If the computer is using the Windows NT

®

 operating system, a USB Interface Cradle will 

not be able to be used, as Windows NT

®

 does not support USB devices.