LogTag Recorders LogTag Analyzer Temperature Recorder Benutzerhandbuch

The LogTag fits into the Interface Cradle just like a putting a piece of bread into a toaster. 
As shown in the following picture, the LogTag faces towards the front label of the 
Interface Cradle with the contacts on the reverse side. If you look into the Interface 
Cradle slot, you will be able to see where the contacts connect with the matching contacts 
in the Interface Cradle. 

 

When placing the LogTag into the Interface Cradle slot, you should be able to feel a very 
slight resistance as the contacts "grab" the LogTag. This is normal. Removal of the 
LogTag will cause a slight clicking noise as the contacts snap back into their "unloaded 
position". 

If the LogTag has readings stored within its memory, the software will automatically start 
to download the data and will also display an animated picture during the download 
process, similar to the following picture.