Gaggenau CM210710 Handbuch
24
De-activating the setting:
Set the time to
--:-- with r or s.
Note: The current time must be set for this function to
run.
run.
The switch-on time is retained even if there is
a power failure or the main power switch 1 is
turned off.
a power failure or the main power switch 1 is
turned off.
This function is used to specify after how many hours
following the last brew the appliance automatically
switches to standby mode.
following the last brew the appliance automatically
switches to standby mode.
Hold down button P on display for at least
3 seconds.
3 seconds.
Select
OFF IN with r or s.
Press button
q, hours display flashes.
Change the setting with
r or s.
Press button
q to save the setting.
Press the
o button. Back to standby.
The switch-off time is retained even if there is
a power failure or the power switch 1 is
actuated.
a power failure or the power switch 1 is
actuated.
The number of brewed espressos, coffees and preground
coffees is displayed here. The number of brews are
counted automatically.
coffees is displayed here. The number of brews are
counted automatically.
Hold down button P on display for at least
3 seconds.
3 seconds.
Select
n0.BREwS with r or s.
Press the
o button. Back to standby.
This number cannot be changed!
Possible from “standby" mode only
Simultaneously hold down
r and s for at least
3 seconds – all saved settings are deleted.
The display indicates the messages in the
German language after the RESET function.
German language after the RESET function.
Standby mode
OFF IN
4 hours
4 hours
Off in
2 hours
2 hours
Displaying number
of brews
of brews
no.brews
- - - 86
- - - 86
RESET function