Gaggenau CM210710 Handbuch
32
Set function selector to
0 position.
Note: The appliance is automatically rinsed. Water flows
at intervals into the receptacle. Wait for the next message
on display (approx. 4 minutes).
at intervals into the receptacle. Wait for the next message
on display (approx. 4 minutes).
Set function selector to
) position.
Note: The appliance is automatically rinsed. Water flows
at intervals into the tray 23. Wait for the next message on
display (approx. 4 minutes).
at intervals into the tray 23. Wait for the next message on
display (approx. 4 minutes).
Empty tray 23 and coffee dreg tray 21.
Clean and dry contacts 25.
Re-insert tray 23 and coffee dreg tray 21.
Wipe splashes off the nozzle and appliance.
Note: The appliance is automatically rinsed.
The descaling process is complete. The illuminated ring
on
on
m descaling goes out. The appliance is ready for
use again.
The descaling program requires a specific water
temperature before it can start. If the water temperature
is too high, drain hot water first!
temperature before it can start. If the water temperature
is too high, drain hot water first!
Place a receptacle under the nozzle.
Set function selector to
0 position.
Water runs into the receptacle.
Set function selector to
) position.
The required temperature has been reached.
The descaling process can start.
The descaling process can start.
Turn on
water
water
empty clean
trays contacts
trays contacts
Unit is
rinsing
rinsing
unit de-
scaling
scaling
coffee
Turn on
coffee
coffee
unit de-
scaling
scaling
Draining hot water
system
too hot
too hot