Whirlpool WGG755S0B Anleitung Für Quick Setup

1. Press BAKE for the desired oven.

“BAKE” scrolls down in the upper text display area or scrolls 
up in the lower text display area, depending on oven 
selection, and 350°F is displayed. After 3 seconds “Set temp” 
scrolls in the selected oven text display area, followed by 
“Push START.”

2. Press START for the desired oven. “Baking” scrolls in the 

selected oven text display area. Then, after 3 seconds, 
“Preheating” scrolls in the display.

The igniter used to light the bake burner will glow. Once the 
igniter is hot, the oven bake burner should light. Under certain 
conditions, it may take up to 60 seconds for it to light.

■

Press CANCEL for the desired oven to turn off the oven.

■

Check that the range is plugged in and circuit breaker has not 
tripped or the household fuse has not blown.

■

Check that the gas shutoff valve is set to the “open” position.

Repeat start-up. If burner does not light, press CANCEL for the 
desired oven to turn off the oven and contact your dealer or 
authorized service company for assistance.

1. Press BROIL for the upper oven. “BROIL” scrolls down in the 

upper text display area, and 550°F is displayed. After 
3 seconds, “Set temp” scrolls in the upper oven text display 
area, followed by “Push START.”

2. Press START for the upper oven. “Broiling” scrolls in the 

upper oven text display area and remains there until the set 
temperature is reached.

The igniter used to light the broil burner will glow. Once the 
igniter is hot, the oven burner should light. Under certain 
conditions, it may take up to 60 seconds for it to light.

■

Press CANCEL for the upper oven to turn off the oven.

■

Check that the range is plugged in and circuit breaker has not 
tripped or the household fuse has not blown.

■

Check that the gas shutoff valve is set to the “open” position.

Repeat start-up. If burner does not light, press CANCEL for the 
upper oven to turn off the oven and contact your dealer or 
authorized service company for assistance.

1. Check that all parts are now installed. If there is an extra part, 

go back through the steps to see which step was skipped.

2. Check that you have all of your tools.

3. Dispose of/recycle all packaging materials.

4. Check that the range is level. See the “Level Range” section.

5. Use a mild solution of liquid household cleaner and warm 

water to remove waxy residue caused by shipping material. 
Dry thoroughly with a soft cloth. For more information, see 
the “Range Care” section of the Use and Care Guide or User 
Instructions.

6. Read the Use and Care Guide or User Instructions.

7. Turn on surface burners and oven. See the Use and Care 

Guide or User Instructions for specific instruction on range 
operation. 

■

Household fuse is intact and tight, or circuit breaker has not 
tripped.

■

Range is plugged into a grounded 3 prong outlet.

■

Gas pressure regulator shutoff valve is in the “on” position.

■

Electrical supply is connected.

■

See “Troubleshooting” in the Use and Care Guide or User 
Instructions.

8. When the range has been on for 5 minutes, check for heat. If 

the range is cold, turn off the range and check that the gas 
supply line shutoff valve is open.

■

If the gas supply line shutoff valve is closed, open it, then 
repeat the 5-minute test as outlined above.

■

If the gas supply line shutoff valve is open, press the 
CANCEL button on the oven control panel and contact a 
qualified technician.

Please reference the “Assistance or Service” section of the Use 
and Care Guide or the cover of the User Instructions, or contact 
the dealer from whom you purchased your range.