Whirlpool CGT8000XQ Installationsanweisungen

3.  Move hinge to other side. Reinstall 4 screws. 

4.  Reinstall plug strips on opposite side of the inner door.

5.  Check for fingerprints on the glass. Clean if necessary.

1.  Place the inner door assembly inside the outer door 

assembly.

2.  Reassemble the inner and outer door assemblies with the  

6 screws. 

1.  Use a small flat-blade screwdriver to remove plug strip from 

the dryer door opening. Slide the head of the screwdriver 

under the plugs, without scratching dryer surface, and lift  

up strip.

2.  Remove the strike using a Phillips screwdriver.

3.  Insert strike on the opposite side. 

1.   Partially insert the second screw from the top; then slide 

the hinge onto this screw while hooking the hinge into the 

front panel hole. Reattach door to dryer front panel with the 

remaining three screws.

2.  Check for fingerprints on the glass. Clean if necessary. 

3.  Close door and check that it latches securely.