Whirlpool CGT8000XQ Installationsanweisungen

• Clean lint screen before and after each cycle.

• Removing accumulated lint:

 

From inside the dryer cabinet:

 

 Lint should be removed every 2 years or more often, 

depending on dryer usage. Cleaning should be done 

by a qualified person.

 

From the exhaust vent:

 

 Lint should be removed every 2 years, or more often, 

depending on dryer usage.

•  Keep area around dryer clear and free from combustible 

materials, gasoline and other flammable vapors and liquids.

• Keep dryer area clear and free from items that would  

  obstruct the flow of combustion and ventilation air.

• Electrical supply is connected.

• Circuit breaker is not tripped or house fuse is not blown.

•  Door is closed. Listen closely to hear the door switch 

activate.

• Cycle selection button has been pushed firmly.

•  For gas dryers, check that gas supply shut-off valves are set 

in open position.

n

   Use only “HE” High Efficiency detergent.

n

   Leave the door slightly open after each cycle to allow for 

better ventilation and drying of washer interior.

n

   Clean the washer monthly (see “To clean washer interior”), 

using 2/3 cup (160 mL) of liquid chlorine bleach.

n

   If the procedure does not sufficiently improve the washer 

freshness, please evaluate your installation and usage 

conditions for other causes.

Use a soft damp cloth or sponge to wipe up any spills. 

Occasionally wipe the outside of your washer to keep it looking 
new. Use mild soap and water. Do not use abrasive products.

The dispenser drawer is removable for easy cleaning.

1.  Unlock the dispenser drawer for removal by inserting a flat-

blade screwdriver into the catch release. Remove the dispenser 

drawer.

2.  Remove the inserts (the siphon from the softener and bleach 

compartments).

3.  Wash the parts under running water. 

 

NOTE: Do not wash components in the dishwasher.

4.  Replace the inserts and return the dispenser to the drawer.

Replace the inlet hoses after 5 years of use to reduce the risk 

of hose failure. Periodically inspect and replace inlet hoses if 

bulges, kinks, cuts, wear, or leaks are found.

When replacing your inlet hoses, record the date of 

replacement.

Contact your authorized Whirlpool

®

 Commercial Laundry distributor. To locate your authorized Whirlpool

®

 Commercial Laundry 

distributor, or for web inquiries, visit www.WhirlpoolCommercialLaundry.com.

If you cannot locate your distributor, the Commercial Laundry Support Center will answer any questions about operating or 

maintaining your washer/dryer not covered in the “Installation Instructions.” 

Just dial 1-800 NO BELTS (1-800-662-3587) — the call is toll free.

When you call, you will need the washer/dryer model numbers and serial numbers. Both numbers can be found on the serial-rating 

plate located in the dryer door well.