Dacor DYRP48DSNGH Installationsanweisungen

Installation Instructions

Cooktop Assembly

Never attempt to operate the range’s cooktop with any of the 

burner rings, burner caps or grates removed.

• 

Remove the burner rings, burner caps and grates from their 

shipping packages.

• 

Install the burners as shown. Either type (color) of the 

supplied burner caps may be used. When installing the 

burner components, twist each piece back and forth slightly 

until it drops completely into place. The burners will not 

operate properly unless all of the burner pieces are properly 

seated.

• 

Gently set the grates on top of the spill tray. Put the legs of 

each grate inside the corresponding dimples.

STEP 1: Install 

burner head. Put 

locating tab in 

keyed hole.

STEP 1: Put burner 

ring on top of head.

STEP 2: Install 

burner ring. Line up 

ring tabs with head 

slots. 

STEP 2: Turn ring until it 

drops into place.

STEP 3: Install burner 

caps. Ridge on cap must 

surround top of ring.

STEP 3: Install burner 

cap. Ridge on cap must 

surround top of ring.

Burner 

head

Burner ring

Burner 

ring

Ridge on 

bottom of 

burner cap

Burner base

Burner head

SimmerSear 

burner

Standard 

burner

Spill tray

Ridge on 

bottom of 

burner cap

Keyed

hole