Maytag MGDB855DC Installationsanweisungen

1. Remove the 3 plugs with a flat head screw driver. There  

  is a cut out to stick the screwdriver under to pop out. 

2.  Remove the 10 screws from the dryer door and set  

screws off to the side.

3.  Remove the inner door by taking a plastic putty knife to 

separate the sides and bottom of the dryer door and trim. 

There are 2 snaps on left, right, and bottom of door. Insert  

the putty knife next to the snaps.

4.  When you have the door separated from the frame use a putty 

knife and lift up in the center tab and then pull door towards 

you and out. Lay the door on a flat, covered surface, with the 

inside of the door facing up.