Maytag MGDB855DC Installationsanweisungen

7.  Remove the 3 screws down the left and right sides  

of the door to remove the outer trim pieces.

9.  Add the hinges to the right side of the door and then flip  

the hinge labeled 1 to the bottom of the right side and the 

hinge labeled 2 to the top of the right side of the door.

6.  Remove the door hinges and set off to the side.

8.  Lift door up and rotate trim pieces to the opposite side they 

were removed from. Then screw trim pieces back in.

5.  Remove the door strike plug with a flathead screw driver. 

Remove door strike by pinching the clips from the inside  

door panel and then rotate and push out the front. Insert  

door strike on the other side of dryer door by pushing in  

and then add the door strike plug.