Summit CL63FDOS Benutzeranleitung

Notes: 
  Unplug the power cord and release the 

brake before moving the cabinet. 

  Do not put any goods on top of the cabinet 

and avoid slanting the cabinet when 
moving it. 

  Push the cabinet from the rear making 

sure the door does not open. 

  To avoid short circuits, please do not use 

the cabinet in bad weather. Position the 
cabinet under a canopy. 

  Do not let children climb on the cabinet or 

move the cabinet to another location. 

 

Keep the caster brake in “ON” position 
while in desired location. 

  Cabinet must be placed on a level surface. 
  Cabinet will reach its cooling efficiency 

after one hour.   

a) Tilt the unit on its back on a level surface   

and remove the 4 cabinet legs (Fig. 3 
number 4). 
Reserve the cabinet legs. 

b) Assemble the casters with brake (Fig. 2)   

on the cabinet front bottom and the other 2 
casters (Fig. 1) at the cabinet rear bottom. 

c) Assemble each caster to the bottom of the 

unit with (2) M5x10 screws with a star or 
Phillips screwdriver (Fig. 3). 

d) The caster brake (Fig. 3 number 1) at the 

front bottom of the cabinet comes with a 
braking function. When the brake handle 
is “ON” (Fig. 2)’ unit wont roll; when brake 
handle is “OFF” (released), it will roll.(Fig. 2) 

 

A 115 Volt (AC only) 60 Hz grounded 
electrical supply equipped with a 15- or 20- 
amp fuse or circuit breaker is required. It is 
recommended that a separate circuit serving 
only your appliance be provided. Use outlets 
that cannot be turned off by a switch or pull 
chain. Connect this appliance to a 3-prong 
power supply outlet that has a ground

 
 
terminal. If you only have a 2-prong outlet, 
have it replaced by a qualified technician 
with an outlet that meets the local codes. DO 
NOT USE AN EXTENSION CORD. 
Required nominal voltage and frequency are 
indicated on the rating plate. The connection 
to the power supply and grounding has to be 
made according to current standards and 
regulations.