Maytag MDG25PRAWW Gebrauchsanleitung
2
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
Security T-20 TORX
■
®†
driver
Phillips screwdriver
■
Card reader
■
Parts supplied
Check that all parts were included.
Bezel
■
Wiring harness
■
Phillips-head screws (2)
■
Installing the Card Reader
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Unplug washer or dryer or disconnect power.
It is recommended to cover the top of the washer or dryer
2.
to avoid scratching the top or the console parts.
Pull out and remove dispenser from washer.
Pull out and remove dispenser from washer.
3.
4. Remove the outer console panel:
Washer:
Remove the 6 TORX
®
T20 security screws attaching the
outer console panel to the control panel assembly.
Dryer:
Remove the 8 Torx
®
T20 security screws attaching the outer
console panel to the control panel assembly.
5. Remove the card reader slot cover. Discard card reader
slot cover. Dryer shown.
6. Remove the control panel assembly. Dryer shown.
A. Card reader slot cover
A
†
® TORX is a registered trademark of Textron Innovations, Inc.
INSTALLATION INSTRUCTIONS