Maytag MDG25PRAWW Gebrauchsanleitung

7.  Attach the card reader to the inside of the card reader bezel  

 

per instructions from the card reader manufacturer.

8.  Install the assembled card reader-bezel assembly into  

 

the control panel and secure with the 2 screws in literature  

 

package.

9.  Plug the wiring harness into the card reader and the card   

 

reader port on the control board at AA3.

10.  Reinstall the console panel assembly and outer control    

 

panel by reversing steps 6 and 4, and for washers, 3.  

 

Dryer shown.

11.  Reinsert detergent dispenser assembly (washer only).

Check that all parts are now installed. If there is an extra 

part, go back through the steps to see which step was 

skipped.
 Check that you have all of your tools.

3.   Dispose of/recycle all packaging materials.

Plug into a grounded 3 prong outlet.
Electric Dryers

In the U.S.A.:
For power supply cord installations, plug into a grounded 

(earthed) outlet. For direct wire installations, turn on power.
In Canada:
Plug into a grounded 4 prong outlet. Turn on power.

If you need assistance:
Contact the distributor where the washer was purchased or visit 

www.whirlpoolcommerciallaundry.com.
When you call, you will need the washer model number and 

serial number. Both numbers can be found on the serial-rating 

plate located on your washer.