Maytag MHW7100DW Benutzung Und Pflege
20
Load not rinsed
Check for proper water supply.
Make sure hot and cold inlet hoses are not reversed.
Both hoses must be attached and have water flowing to the inlet
Both hoses must be attached and have water flowing to the inlet
valve.
Both hot and cold water faucets must be on.
Inlet valve screens on washer may be clogged.
Remove any kinks in the inlet hose.
Both hot and cold water faucets must be on.
Inlet valve screens on washer may be clogged.
Remove any kinks in the inlet hose.
Not using HE detergent or using too
much HE detergent.
The suds from regular detergent can cause the washer
to operate incorrectly.
Use only HE detergent. Always measure detergent and follow
Use only HE detergent. Always measure detergent and follow
manufacturer’s directions based on load size and soil level.
Washer not loaded as recommended.
Avoid tightly packing the washer. The washer will not rinse well
if tightly packed. Load with dry items only. See the “Cycle Guide”
for load size recommendations for each cycle.
Use cycle designed for the fabrics being washed.
Add only 1 or 2 garments after washer has started.
Use cycle designed for the fabrics being washed.
Add only 1 or 2 garments after washer has started.
If you experience
Possible Causes
Solution
First try the solutions suggested here or visit our website at www.maytag.com/product_help –
In Canada www.maytag.ca for assistance and to possibly avoid a service call.
Washer not performing as expected (cont.)
Washer not loaded as recommended.
Not cleaning or
removing stains
Add load loosely. Items need to move freely for best cleaning. See
the “Cycle Guide” for load size recommendations for each cycle.
Add only 1 or 2 garments after washer has started.
Add only 1 or 2 garments after washer has started.
Not using HE detergent or using too
much HE detergent.
Use only HE detergent. Always measure detergent and follow
manufacturer’s directions based on load size and soil level.
Hard water or high level of iron (rust) in
water.
You may need to install a water softener and/or iron filter.
Fabric softener dispensing ball used.
Dispensing balls will not operate correctly with this washer.
Add liquid fabric softener to the fabric softener compartment.
Powdered detergent used for
low-speed cycle.
Consider using liquid detergent.
Load is wrinkled,
twisted, or tangled
Washer not loaded as recommended.
Add load loosely. Items need to move freely reduce wrinkling and
tangling. See the “Cycle Guide” for load size recommendations
for each cycle.
Reduce tangling by mixing types of load items. Use the
Reduce tangling by mixing types of load items. Use the
recommended cycle for the type of garments being washed.
Select a lower soil level. Note that items will not be cleaned as
Select a lower soil level. Note that items will not be cleaned as
deeply as when using a higher soil level.
Wash action too long for load.
Unload the washer as soon as it stops or use Fresh Hold
®
/
Fresh Spin
™
option if you will not be able to unload the washer at
the end of the cycle.
The washer is not unloaded promptly.
Use the Delicates cycle or another cycle with a low spin speed
to reduce wrinkling.
Not choosing the right cycle for the load
being washed.
If safe for load, use warm or hot wash water.
The wash water was not warm enough
to relax wrinkles.
The load may be out of balance.
When load unbalance occurs, a washing process will start to
redistribute the load. This may lengthen the cycle time. Avoid
washing single items. Balance a single item such as a rug or jeans
jacket with a few extra items.
For best performance, not all settings
are available with each cycle, and some
options cannot be used together.
Desired setting or
option does not light
See the “Cycle Guide” for the available settings and options for
each cycle.
TROUBLESHOOTING
Select a lower spin speed. Note that items will be wetter than when
using a higher speed spin.
Spin speed too high for load.