Maytag MHW7100DW Benutzung Und Pflege

22

Clogged dispensers or laundry  

products dispensing too soon.

Do not overfill dispenser. Overfilling causes immediate dispensing.
Load dispensers before starting a cycle.
Homes with low water pressure may result in residual powder in the 

dispenser. To avoid, select a warmer wash temperature if possible, 

depending on your load.
Use only liquid chlorine bleach in the bleach compartment.

Incorrect dispenser 

operation

Liquid chlorine bleach not used in bleach 

compartment.

It is normal for small amounts of water to remain in dispenser at the 

end of the cycle.

Water in dispenser after cycle has 

finished.

If you experience

Possible Causes

Solution

First try the solutions suggested here or visit our website at www.maytag.com/product_help –

In Canada www.maytag.ca for assistance and to possibly avoid a service call. 

Washer not performing as expected (cont.)

Not using correct cycle for load type.

When using the Rapid Wash or Delicates cycles, you should wash 

small loads. This ensures a gentle wash for your garments without 

increasing cycle times. 

The Rapid Wash cycle is designed for smaller load sizes  

(2–4 items) of lightly soiled garments. If larger loads are  

washed in this cycle, cycle time will be increased.

Normal washer operation.

The cycle times vary automatically based on your water pressure, 

water temperature, detergent, and clothes load. The options you 

select will also affect the cycle times.  

Cycle time changes or 

cycle time too long

Excessive suds in washer.

Load may be out of balance.

When excessive suds are detected, a special suds routine  

automatically starts to remove extra suds and ensure proper rinsing 

of your garments. This routine will add time to the original cycle. 

When load unbalance occurs, a washing process will start to  

redistribute the load. This may lengthen the cycle time. Avoid 

washing single items. Balance a single item such as a rug or jeans 

jacket with a few extra items.

Single-dose laundry 

packet not dissolving

Adding laundry packet incorrectly.

Be sure laundry packet is added to washer drum before adding 

clothes. Do not add packet to dispenser. Follow the manufacturer’s 

instructions to avoid damage to your garments.

Control Lock is on.

Touch and hold CONTROL LOCK for 3 seconds to turn off Control 

Lock. For each second CONTROL LOCK is held down, the display 

will count down one second: you will see “3,” then “2,” then “1.”

The controls are not 

responding