Maytag MGD7100D Installationsanweisungen

If dryer is not level, prop up using a wood block, use wrench  

to adjust legs up or down, and check again for levelness. 

Once dryer is level, make sure all four legs are snug against 

the floor and the dryer does not rock.

Place 

level here

       Not Level 

            

LEVEL                    Not Level

Check levelness of dryer from  

side to side. Repeat from front to back. 

NOTE: The dryer must be level for the moisture sensing system 

to operate correctly

Using a 4" (102 mm) clamp, connect vent to exhaust outlet  

in dryer. If connecting to existing vent, make sure vent is 

clean. Dryer vent must fit over dryer exhaust outlet and inside 

exhaust hood. Check that vent is secured to exhaust hood 

with a 4" (102 mm) clamp.

Move dryer to final location, taking care not to crush or  

kink vent or flexible gas line.

After dryer is in place, remove corner posts and cardboard 

from under dryer.