Maytag MGD7100D Installationsanweisungen

Seite von 44
17
5. 
Reverse outer window assembly
Using a Phillips screwdriver, remove the 4 screws from the 
outer window retainer and lift off the trim ring off the window 
(A). Rotate trim ring 180° and secure with the 4 screws 
removed earlier (B). 
Handle
Fig. A
Fig. B
Handle
6.  
Rotate and reassemble outer window 
assembly to trim ring
With the edge with 2 notches at the top, align the notches 
on the outer window assembly with the tabs on the trim ring 
and lower into place as shown in figure A. Rotate the outer 
window assembly counterclockwise to lock tabs into place 
(figure B). Using a Phillips screwdriver, secure with 2 screws 
removed earlier.
IMPORTANT: Do not overtighten.
Fig. A
Fig. B
Bottom 
of door
Notches