Whirlpool WGE555S0BB Installationsanweisungen

1. Check that all parts are now installed. If there is an extra part, 

go back through the steps to see which step was skipped.

2. Check that you have all of your tools.
3. Dispose of/recycle all packaging materials.
4. Check that the range is level. See “Level Range.”
5. Use a mild solution of liquid household cleaner and warm water 

to remove waxy residue caused by shipping material. Dry 
thoroughly with a soft cloth. For more information, read the 
“Range Care” section of the Use and Care Guide.

6. Read the range Use and Care Guide.
7. Plug power cord into appropriate outlet. Slide range into its 

final location. Check that the flexible conduit or power supply 
cord are not bent.

8. Turn power on. Turn on surface elements and oven. See the 

Use and Care Guide for specific instruction on range operation. 

■

Household fuse is intact and tight; or circuit breaker has not 
tripped.

■

Range is plugged into a grounded outlet.

■

Electrical supply is connected.

■

See “Troubleshooting” in the Use and Care Guide.

When the range has been on for 5 minutes, check for heat. If 
range is cold, turn off the range and contact a qualified 
technician.

When moving range, slide range onto cardboard or hardboard to 
avoid damaging the floor covering.

If removing the range is necessary for cleaning or maintenance:

1. Slide range forward.

2. Unplug the power supply cord.

3. Complete cleaning or maintenance.

4. Plug power supply cord into a grounded outlet.

5. Slide range back so rear range foot is under anti-tip bracket.

6. Refer to the “Verify Anti-Tip Bracket Is Installed and Engaged” 

section to verify engagement.

7. Check that range is level.

1. Disconnect power.

2. Slide range forward.

3. Complete cleaning or maintenance.

4. Slide range back so rear range foot is under anti-tip bracket.

5. Refer to the “Verify Anti-Tip Bracket Is Installed and Engaged” 

section to verify engagement.

6. Check that range is level.

7. Reconnect power.