GE GFXP1308FMC Installationsanweisungen
3 INSTALL THE PEDESTAL TO THE
WASHER OR DRYER
A Place the pedestal against the bottom of the
unit. Check to be sure the drawer front is at
the front of the washer.
To attach to the dryer:
B Align the holes in the pedestal with the holes
in the bottom of the unit. Use a Phillips
screwdriver to install the 4 screws through the
pedestal and into the unit – do not tighten.
C Slide the pedestal toward the unit until it is
aligned front to back. Use an 8 mm socket
wrench to securely tighten the screws.
2 PREPARE THE PEDESTAL
A Pull the drawer
out as far as it
will go.
B
Remove screws
from drawer
slides. Slide
drawer out of
the base and
set aside.
Installation Instructions
2
7RDWWDFKWRWKHZDVKHU
B Align the holes in the pedestal with the holes in
the bottom of the unit. Use a 9/16” socket
wrench to install the 4 washer mounting bolts
through the pedestal and into the unit – do not
tighten.
C Slide the pedestal toward the unit until it is
aligned front to back. Use a 9/16” socket
wrench to securely tighten the bolts.