GE GFXP1308FMC Manuel De Montage

3   INSTALL THE PEDESTAL TO THE 

A    Place the pedestal against the bottom of the 

unit. Check to be sure the drawer front is at 

the front of the washer.

B    Align the holes in the pedestal with the holes 

in the bottom of the unit. Use a Phillips 

screwdriver to install the 4 screws through the 

pedestal and into the unit – do not tighten.

C   Slide the pedestal toward the unit until it is 

aligned front to back. Use an 8 mm socket 

wrench to securely tighten the screws.

2   PREPARE THE PEDESTAL

A    Pull the drawer 

out as far as it  

will go.

B   

Remove screws 

from drawer 

slides. Slide 

drawer out of 

the base and  

set aside.

B    Align the holes in the pedestal with the holes in 

the bottom of the unit. Use a 9/16” socket 

wrench to install the 4 washer mounting bolts 

through the pedestal and into the unit – do not 

tighten.

C   Slide the pedestal toward the unit until it is 

aligned front to back. Use a 9/16” socket 

wrench to securely tighten the bolts.