Fagor 60CFG30B Installationsanleitung

 

9

 

1. 

Raise the hood into its mounting position.   

2. 

Align the rectangular opening on the back of the hood with 
the wall-mounting bracket. Gently lower the hood until it 
securely engages the bracket.   

3. 

Open the Al. filter and find the two Ø8 mm holes    on the 
back of the hood. Level the hood with 2 mounting screws 
(4*30mm) with washer. Use drywall anchors provided. 

 
 

4. 

Put the glass in the lead way, use four screws (4x25mm) 
with glass washer and rubber washer to fix the glass. 
(Note: the screws and washers should be installed as 
shown.) 

 

 

 

 

 

5. 

Measure the height of the slide duct fixing support. Adjust 
the height of the chimney according to the height. Then 
use the duct fixing support with two screws (4x8mm) to 
fix the chimneys. Shown as in the pic. 

6. 

Put the chimney on the hood, use two screws(4x8mm)to 
fix the chimney to the duct fixing support. 

7. 

Use the other two screws (4x8mm) to fix the bottom of 
chimney. 

8. 

After adjusting the position, open the filter and fix the    body 
inside with safety screws

（4X30MM）.