MicroFridge 103LMF49TP Benutzeranleitung

5

1. Locate the microwave oven. Remove the 
   packet of twelve (12) screws located inside 
   the microwave oven. Retain the screws.

2. Place the bracket on top of the 
   refrigerator/freezer with its rear lip 
   facing downward over the back edge of 
   the refrigerator/freezer, and the two 
   sides facing up to accept the 
   microwave oven.

3. Align the holes in the rear lip of the 
   bracket with those on the back of the 
   refrigerator/freezer, and attach using 
   the screws from Step1.

4. Using the screws from Step 1, attach 
   the bracket to the top of the refrigerator/
   freezer using the six (6) holes located
   near the two upright sides of the 
   bracket, three (3) holes on each side.
   There are no preset holes in the top of
   the refrigerator/freezer, so apply
   pressure when installing the screws.

5. Place the microwave oven on top of the 
   refrigerator/freezer and inside the two 
   upright sides of the bracket. Line up 
   the two (2) holes on each side of the 
   microwave oven with those on the 
   bracket, and attach the microwave oven 
   using the screws from Step 1.

6. Plug the refrigerator/freezer AC cord into 
   the outlet on the back of the microwave oven.

7. Plug the AC cord from the microwave oven 
   into an appropriate, grounded outlet.

The MicroFridge

® 

with Safe Plug

® 

combination appliance will now operate within 

eleven (11) to fifteen (15) amps of current draw.

NOTE: 
The MicroFridge

® 

with Safe Plug

® 

 brand refrigerator and charging outlets will not operate when 

the microwave oven is on.  This is part of the patent-pending MicroFridge

® 

with Safe Plug

® 

technology 

that prevents wiring overload.

If your oven does not operate properly, unplug it from the 120 volt household outlet and then plug it back in.  
This unit is not designed for 50Hz or any circuit other than 120 volt/60Hz AC current.