MicroFridge 103LMF49TP Benutzeranleitung
6
INSTALLATION OF MICROWAVE MODELS TO REFRIGERATOR
1. Locate the microwave oven. Remove the
packet of twelve (12) screws located
inside the microwave oven. Retain the
screws.
packet of twelve (12) screws located
inside the microwave oven. Retain the
screws.
2. Place the right bracket flush with the top
right side of the refrigerator/freezer with its
rear lip facing downward over the back
edge of the refrigerator/freezer,the shorter
bend without holes should face outward.
right side of the refrigerator/freezer with its
rear lip facing downward over the back
edge of the refrigerator/freezer,the shorter
bend without holes should face outward.
3. Align the hole in the rear lip of the bracket
with the hole on the back of the
refrigerator/freezer, and attach using the
screws from Step1.
with the hole on the back of the
refrigerator/freezer, and attach using the
screws from Step1.
4. Using the screws from Step 1, attach the
bracket(s) to the top of the refrigerator/
freezer using the three (3) holes located on
the bottom of the braket, There are no
preset holes in the top of the refrigerator/
freezer so apply pressure when installing
the screws.
bracket(s) to the top of the refrigerator/
freezer using the three (3) holes located on
the bottom of the braket, There are no
preset holes in the top of the refrigerator/
freezer so apply pressure when installing
the screws.
5. Place the left bracket flush with the top left
side of the refrigerator/freezer with its rear
lip facing downward over the back edge of
the refrigerator/freezer, the shorter bend
without holes should face outward.
side of the refrigerator/freezer with its rear
lip facing downward over the back edge of
the refrigerator/freezer, the shorter bend
without holes should face outward.
6. To finish installing the left bracket please repeat steps 4 and 5.
7. Place the microwave oven on top of the refrigerator/freezer and inside the two upright
sides of the brackets. Line up the two (2) holes on each side of the microwave oven
with those on the brackets, and attach the microwave oven using the screws from
Step 1.
sides of the brackets. Line up the two (2) holes on each side of the microwave oven
with those on the brackets, and attach the microwave oven using the screws from
Step 1.
8. Plug the refrigerator/freezer AC cord into the outlet on the back of the microwave oven.
9. Plug the AC cord from the microwave oven into an appropriate,grounded outlet.
The MicroFridge
®
with Safe Plug
®
combination appliance will now operate with
in
eleven (11) to fifteen (15) amps of current draw.
MicroFridge
®
with Safe Plug
®
Models 10.3RMFR/10.3LMFR
Assembly Diagram.
NOTE:
The MicroFridge
The MicroFridge
®
with Safe Plug
®
brand refrigerator and charging outlets will not operate when
the microwave oven is on. This is part of the patent-pending MicroFridge
®
with Safe Plug
®
technology
that prevents wiring overload.
If your oven does not operate properly, unplug it from the 120 volt household outlet and then plug it back in.
This unit is not designed for 50Hz or any circuit other than 120 volt/60Hz AC current.
This unit is not designed for 50Hz or any circuit other than 120 volt/60Hz AC current.