Maytag MVWC215EW Benutzung Und Pflege

1.  Shut off both water faucets. Disconnect and drain water inlet 

hoses.

2.  If washer will be moved during freezing weather, follow     

Winter Storage Care directions before moving.

3.  Disconnect drain from drain system and drain any remaining 

water into a pan or bucket. Disconnect drain hose from back 

of washer.

4.  Unplug power cord.
5.  Place inlet hoses and drain hose inside washer basket.
6.  Drape power cord over edge and into washer basket.
7.  Place packing tray from original shipping materials back inside 

washer. If you do not have packing tray, place heavy blankets 

or towels into basket opening. Close lid and place tape over 

lid and down front of washer. Keep lid taped until washer is 

placed in new location. Transport washer in upright position.

To reinstall washer after non-use, vacation, winter storage,  

or moving:

1.  Refer to “Installation Instructions” to locate, level, and  

connect washer.

2.  Before using again, run washer through the following   

recommended procedure:

To use washer again:
1.  Flush water pipes and hoses. Reconnect water inlet hoses. 

Turn on both water faucets.

2.  Plug in washer or reconnect power. 
3.  Run washer through Normal cycle to clean washer and  

remove antifreeze, if used. Use half the manufacturer’s  

recommended amount of detergent for a medium-size load.